This article introduces the production method of Heaven and Earth Lid box. It comes from the experience of Dongguan Haiying color printing Co., LTD. Haiying adopts advanced custom technology of Heaven and Earth Lid box. Many customization companies want to know about this technology. Here we introduce the production method.
What is a Heaven and Earth Lid box?
Heaven and Earth cover box is a type. The lid of the box is the sky, and the bottom is earth, So it’s called the Heaven and Earth Lid box. Haiying paper boxes used in all kinds of packaging boxes, such as hardbound gift boxes, shoe boxes, underwear boxes, shirt boxes, mobile phone boxes.
The lid is made of tissue paper and cardboard. The traditional processing of heaven and earth cover box, they first need to face paper and cardboard for cutting. After cutting the cardboard and tissue paper have 1 bottom plate and 4 side-board.There are four corners on both sides of the tissue paper. The rest of the paper is scrap. This leads to an increase in production costs, and production methods are cumbersome.
The traditional production model of Heaven and Earth Lid box
1. Place the cardboard with four side panels on the tissue paper
2. Glue the joint between the side panel and the tissue
3. Lift the tissue paper and the cardboard
4. Bend and bend ears
5. Bend the side-board of the facing paper inward relative to the side-board of the cardboard
6. Apply glue to the joint
7. Finally, it is formed into a lidded box of Heaven and Earth
Haiying printing factory solved the technical problems
Haiying needs to provide a cos-saving Heaven and Earth Lid box based on the above technology and make the production method simple. As a further elaboration of this technology, the production method of the Heaven and Earth Lid box has the following steps:
S1. Glue rolling: Apply glue on the surface of tissue paper;
S2. Positioning: Place the 1 and 3 side plates on the tissue paper to make the 2 and 1 coincide.3 attached to the top of 1, at the same time, the surface paper and board positioning to prevent movement;
S3. Installation side plate: position 4 vertically on the left and right ends of 2;
S4. Side-board: push 3 and 1 up at the same time, making 3 and 1 perpendicular to 2;
S5. Folding ear: Bend the folding ear located on 1 inward so that the folding ear is attached to 4 respectively;
S6. Molding: Push the 2 up so that the 2 is attached to the 4;
S7. fold into the bubble: fold 1 and 2 inward relatives to 2, respectively, to drive out the bubbles between paper and cardboard.
In the picture: 1. Tissue paper;2. Board;3. First base plate;4. First side plate;5. Second side plate;6. Fold the ear;7. Second base plate;8. Third side plate;9. Fourth side panel.
Contact us by email gong@huaprinting.com
Last arts Back to Product Next arts